邦仕嘉界面劑

待邦仕嘉界面劑涂抹干透或"造毛"養(yǎng)護干燥后即可開始抹灰或批刮膩子，用1:1水泥砂漿加入水泥膠漿，將其抹在瓷磚背面找平壓實，砂漿自上而下進行，并隨時用靠尺檢查平整度。

粘結(jié)墻布和壁紙時如覺粘度高可加少量水稀釋，用邦仕嘉界面劑"造毛"不得加水使用。消耗量:理論上，1公斤邦仕嘉界面劑可涂布10平方米(一遍)，實際用量因施工中多種因素影響的而定。

Bosia interface agent is a new type of new water-soluble high polymer concretes contact surface finishing agent, and the outward appearance is the cream color liquid cement. Apply to indoor concrete, aerated concrete, masonry walls approved blows the putty plastering the dense basic level before treatment, apply to the paste before the wall tiles artificial basic level to "create roughness".

Have excellent permeability, can fully infiltrating the substrate surface, so that basic dense, enhances smooth interface attachment. its non-toxic, tasteless, green products.

Construction requirements and Attention

The level should be a solid surface, no floating ash and solid oil.

Bosia interface agent will be coated in the walls with roller brush afterdiluted with 20 percent to 30 percent of the water, coated 1-2 times.

Create roughness: Stirs the thick liquid with the cement and the Bosia interface agent contact surface medicinal preparation pappy, tools applied at the basic level on.

Construction of temperature in more than 5 ℃, unused plastic sealed attention.

This refuses with other brand adhesive mix use.

Usage and amount used

Bosia interface agent to be applied dry or agent, "created roughness" conservation dried or grant to start plastering or blows the putty , to join with 1:1 cement mortar cement mortar, the tiles in the back of his hand leveling compaction, mortar Top-down, and at any time with the formation of the inspection on foot.

When felt wall fabric and wallpaper, adding a small amount of water can be diluted if high viscosity .use Bosia interface agent to "create roughness" without water. Consumption: In theory, one kg of Bosia interface agent can be coated 10 square meters (for one time), the actual amount due to construction of a number of factors affect them.

Storage and transport

The goods stored in 5 ~ 40 ℃ cool ventilation, no insolate and suffer freeze, the durability period is 12 months. its noncombustible and non-toxic products, transport and storage according to "non-dangerous goods rules" .

基層表面應(yīng)堅實、無浮灰和油漬。

將邦仕嘉界面劑繳入20%-30%的水稀釋后，用輥刷涂布在墻面，涂1-2遍。

造毛:用水泥和邦仕嘉界面劑攪拌成漿糊狀，用工具涂抹在基層上。

施工溫度在5℃以上，未用完的膠注意密封。

本品嚴禁與其他品牌的膠粘劑混合使用。